You can also order our products on eBay
Current terms (February 2023) of international delivery from the state transport company Ukrposhta.
Highest quality materials
Honda VFR1200X сrash bars engine guard for DCT gearbox:
The crash bars are designed to protect the plastic, engine and frame of the motorcycle during falls. Reduces repair costs.
Safety and roadside assistance:
Crash bars are installed only on the factory mounting points without additional modifications (When ordering the product, make sure that your motorcycle has the same model, year of manufacture and standard appearance as in the photo). The kit includes all the necessary hardware for installation.
Crash bars and engine guards are made of certified metal pipes of a special alloy.
- pipe diameter: 25 mm
- pipe thickness: 1,5 mm
Do not unscrew all the bolts on the engine at the same time when installing, because the engine may fall out.
Our products are coated with durable polymer powder paint with additional wear-resistant layer. Color selection is FREE. The product is available in standard black color. When choosing a different color, the term of production is within 15 working days.
Honda VFR1200X Crosstourer engine guard installation instructions
Alternately replace the four engine mounting bolts with special bolts made from the installation kit. The length of the threaded cylindrical part must be the same as the corresponding factory bolt.
Location of special bolts:
160 mm rear left,
125 mm rear right,
110 mm front left,
95 mm front right.
General length is given. Tightening torque 5.5 kgf * m.
Set both halves of the engine guard on the hexagonal parts using four M12x20 bolts. Place washers under the front. The right and left parts must be inserted one into the other. The joints of the halves are fixed with M8x50 bolts and nuts. After tightening the M12 bolts with a torque of 6 kgf * m. insert plugs F25 mm.
Attention!!! Do not unscrew all the bolts on the engine at the same time when installing, because the engine may fall out.
DCT modification requires a slight refinement of the plastic with a cutout for the bolt (right front bolt).
General recommendations for installing products from MottoVoron
When you receive your order, make sure that the package with fasteners is included. Until you find them, do not throw away the packaging.
Before installation, make sure that your technical skills and tools are sufficient to complete the process without any problems. Otherwise, it is better to contact a specialized service for help.
When installing all-welded luggage systems and side frames, on most motorcycles, it is necessary to "release" the mounting of the passenger footrest bracket in order to move it.
Installation of protective arcs on some models requires removal of plastic.
A successful installation is when the product is installed on the motorcycle without "tension" and additional metal tension. It is in this case that the product you bought will please you for many years and will protect the motorcycle in case of a possible fall.
Our team is always ready to help with the installation of our products purchased online. If something goes wrong with your installation, it's better to let us know and our specialists will help promptly.